GuestinPiano Logo Neon Light

Description

Here is the 3D model of the "GuestinPiano" logo, designed as a neon-style desk light with an adjustable RGB LED strip.

The model is divided into two parts:

• The body: to be printed in black PLA for a solid and elegant structure.
• The diffuser: to be printed in white PLA to evenly diffuse the LED strip's light.

There is also a small slot in the base to fit an infrared receiver, allowing you to control the LED strip with a remote.

Print Settings

• Material: Black PLA for the body, white PLA for the diffuser.
• Layer height: 0.24 mm.
• Infill: 5%
• Supports: No support required.

Assembly

• Print the two parts (body and diffuser).
• Place the female jack connector
• Insert the RGB LED strip into the designated channel, ensuring the infrared receiver is placed in the slot at the base. You can secure it with some glue.
• Place the diffuser over the LED strip.
• Connect the female jack to the LED strip and a 12VDC power supply.
• Use the remote control to adjust the lighting and colors through the infrared receiver.