A rear turn signal stem for the mid 80's honda shadow
I printed at 0.3 draft because I don't need one at the moment but I would print at 0.2 anyhow for appearance.
Also would print the hardware with rafts and supports
The files are 3mf but separate for the stem and the fittings
I would also use petg, I have a set of my front signal stems on my bike and they saw some sun this last summer and are holding up nicely.
I have worked on the threads too loosen them a bit but they are not perfect, please feel free to work on them or use a 8mm x 1.75 stud and the nut from the bike.
The author marked this model as their own original creation.
