(Lobotomy Corperation) Don't Touch Fidget Toy

Hello everyone, Happy New Year!!! I wanted to do something quick and decided to do an Abnormality. Unlike the game counterpart, this one won't end your day and potentially bring about the end of the world by pressing it, but it is used as a fidget toy!

The picture in the post isn't the best as I was printing this in a rush to get it posted before New Year's and I was testing a new filament which leaves some weird gray stuff on parts of the print.

FOR PERSONAL NONCOMMERCIAL USE

https://cults3d.com/@MrHShroud

Be sure to leave a comment on what I should make next!

Suggested Print Settings (but feel free to print at whatever settings you want):
Resolution: .2
.2 infill
60 mm/s

Assembly:
1 Top
1 Button
1 Bottom
1 Long pen spring (should be about 25-27mm in length uncompressed)

Step 1: Place the pen spring on the rod in the center of the bottom section.
Step 2: Place the button on the top section.
Step 3: Line up the Top and bottom parts to match the guide rails.
Step 4: Press the parts together.

Note: If you hear a cracking sound or you think the rod in the center snapped, it should still be fine as long as it doesn't snap at the very bottom. Also, make sure to clean the hole on the button to minimize the chance of this happening.