Cool Runner Compressor Risers for Tank Conversion

Had a Master Airbrush Cool Runner II compressor for my airbrush and got tired of it making noise because of constantly being on while using it. I bought an amazon air tank conversion kit and the mounting brackets didn't line up so instead of returning it I created risers for it to fit. Sits perfectly now and has extra height to clear the airline side.

There are two models so you can play around with it there are 4 single pieces or 2 bridge pieces depending on what you want to do. 

Working on add on designs to have an all in one spot where you can hand your hose and airbrush to store away neatly when not it use for those like me who don't have a lot of space.

Print Settings:

Flip it on its side for minimal supports

Filament: PetG

Infill Pattern: Honeycomb for added strength and compression resistance.

infill: 25%

Walls: 3

Supports: yes, max 10%

First layer height: .28

Necessary Hardware to get it mounted:

2 bolts and nuts from amazon kit

2 - 1.5in #10-32 bolt and nut or M5x40mm and nut

2 - 1.25in #10-32 bolt and nut or M5x35mm and nut