Audi Manual Cubby Storage Box

I created a simple storage box to fit into the dash cubby Audi uses for owners manuals.  This helps with storing items due to limited space in the glove box and uncovered storage in the center console area.  This box provides a few storage spaces for some of my needs, such as change, a parking pass, pens, and other odds/ends.  Due to the odd shape of the cubby the box has a few tapers to fit in the cubby geometry. One storage spot has a ramp to help with slipping a parking pass out.

This storage box was modeled to fit into the cubby for an Audi A4 Allroad.  It may fit other Audi models.  The model is sized to maximize storage space while fitting onto a Mk3S+ print bed.  I printed with 20% infill on a smooth sheet, slight lifting may occur at the edges if you have a used/worn PEI sheet.

I printed this in PLA to test (box in images), typically you will want to use PETG or other filament due to high temps inside a vehicle.  I did not have any issues this summer with the PLA box since the cubby is out of the sun.  Choose a filament for your needs.

 Use this model at your own risk, no warranty included or implied.