IVT AT-8 Battery Charger Mount for Skadis

I wanted to Mount my Battery Charger “IVT AT-8” (Oldi but Goldie) on my Skadis Boards, but couldnt find anything both here and other sites, so i decided to create one myself.

Took me lots of Test Prints and several Prototypes until i managed to create something that worked. The Charger fits perfectly into the Mount. 

You will need a Backplate with Hooks for the Mount, grab one from my collection of Universal Mounts here:

https://www.printables.com/model/1129157-skadis-universal-mount-collection-1-to-8-hooks-hor

My recommendation is a mount with at least 4 Hooks, you can find both Horizontal and Vertical Versions in my Collection. Just Print one and glue it on the Bottom of the Battery Charger Mount.

My Print Settings are:

Layer Height 0,2

Walls / Perimeter 5

Top and Bottom Layer 5

Sparse Infill 40% (60% for the Backplate with Hooks)

Infill Pattern Adaptive Cubic (Gyroid for the Backplate with Hooks)

Infill / Wall Overlap 30%

Support Type (needed) Tree, Style Default

Enjoy