Star of David Christmas Decoration

Star of David Christmas Ornament is a 5 point star in 3d

The curve and the transparency give a blown glass look. Add making and elegant and classic look to your decorating.

It is designed to be printed on a resin style printer or an FDM printer. Both models are provided.

The one displayed in the photographs was printed on an Anycubic Photon with clear resin. then washed with acetone and coated with a uv-resistant clear.

The ornament is printed in 12 sections and the glued together with super-glue.

There are 2 resin options.  One with a loop for hanging and one without.

Option 1:  Print one -Star_of_David_RESIN-01,  one  Star of David (Resin) 03, and  ten - Star_of_David_RESIN-02

Option 2:  Print two -Star_of_David_RESIN-01 and  ten- Star_of_David_RESIN-02

The parts are sized so 2 full ornaments can be printed at one time on a Anycubic Photon. They are also pre-hollowed out to give the correct strength while optimizing for resin use.

See the picture for support details.

Assembly Instructions are the same as the link below.:

https://www.instructables.com/ELVIN-CELTIC-STAR-CHRISTMAS-ORNAMENT-BAUBLE/

3D PRINTING SETTINGS FDM Print: When we print these with an FDM printer we use a clear or transparent filament and print it at its upper temp range.

Print in spiral vase mode. a .4 nozzel works but a .8 is better. Print 12 Star of David (FDM) models and glue the together.

The onement in the picture was clear resin, .05 layer Hight, with an acetone wash, and a UV resistant clear coat.