Headphone and games controller stand designed with Fusion 360 - choose your own colours.
When you slice the base, make it 101pc (i.e. slightly larger) to allow the headphone stand to slot in easily.
The photos show added names - I simply added these to the blank headphone stand and sliced the file with a colour change at the right place (26.2mm if you don't change the size) on PrusaSlicer for my Prusa MK3S.
You will need supports for the headphone stand - I simply add Support Enforcers under the 'pegs' that slot into the base - nowhere else needs supports on my printer.
A bit of super glue to glue all the parts together and you're finished - this is not a complex print.
Enjoy.
Please note the licence - please contact me if you have any questions. Thanks.
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:No
Supports:
Yes
Resolution:.2
Infill:
15%
Notes:
When you slice the base, make it 101pc (i.e. slightly larger) to allow the headphone stand to slot in easily.
You will need supports for the headphone stand - I simply add Support Enforcers in PrusaSlicer under the 'pegs' that slot into the base - nowhere else needs supports on my printer. Category: Video GamesThe author marked this model as their own original creation. Imported from Thingiverse.