Fujifilm NP-W126, NP-W126S Battery case

Case for fujifilm NP-W126 and NP-W126S batteries. Optimal wall thickness for the most minimalist design possible.
Original and non-original NP-W126 / S batteries fit into the case.

Recommended PRINT SETTINGS: 

layer heigh: 0.13 - 0.18 (ideal 0.15mm) 

4 Perimeters, 4 - top layers, 6 - minimum bottom layer 

10% infill (if you want you can use more) 

PETG  (test with DevilDesign PETG works great, but Prusament is little bit Better!).

Use weaker (low seeting about 15-25%) cooling for more flexible properties of PETG material.