Dewalt Trim Router Baseplate for Veritas Router Table

This is a base plate that fits the Dewalt DCW600B trim router to the Veritas compact router table top (https://www.leevalley.com/en-us/shop/tools/power-tool-accessories/router-accessories/110563-veritas-table-top?item=05J6701). Compared to the acrylic version Lee Valley sells, this has the advantage of being opaque, so the router LEDs are not shining in your face while you're trying to use it.

I printed with a Bambu X1C, with Bambu Basic PLA. I printed it with the working surface of the plate face down on the Bambu textured plate, with the trade off of having to use supports on the counterbores. I used PETG for the support interfaces, and the lip for the bushings required a bit of clean up.

It has a lip so you can use it with template bushings. I adjusted it to fit Whiteside bushings, and you might have to make adjustments for other brands, or depending on how smooth your support interface cleans up.

The plate is attached to the Veritas table with #10-32 3/8 button cap screws (Bolt Depot #4403), but double check in case Veritas changes the threads in the future.

Feel free to remix to fix other routers or add other features.