DLink DGS-108 Switch 8 Port 19" 1U Rack mount

A 19" 1U rack mount for the DGS-108 switch from DLink.  Both parts are screwed together with a screw and nut. I used M3 bolt and nut.  Glue is not needed.

It is best printed in PETG or a more stable material, as suggested by the original.   I used Snug Supports instead of Organic, used less filament and faster print.  Use the same settings as the  original, 5 perimeters.

Sized pieces to fit 19in rack for the DLink DGS-108 8 port switch.