Fan Holder

This is a fan holder that can be used for a bunch of cool things.

The concept is simple, just press the button to run the fan! (Soldering Required)
 

Here’s what you’ll need:

• 2-pin 50x50x20 Fan
• 6x6x4 press button
• 9v Battery
• 9v Battery connector

Now, let’s get assembling:

1. Solder one of the fan wires with the battery connector (red with red).
2. Solder the other fan wire to the press button.
3. Solder the other side of the battery connector to the press button.
4. Put everything in the enclosure and cover it up.

P.S you might need to shorten the cables to fit the enclosure.

And there you have it!