Box/Container With Magnetic Lid (PrintInPlace or Assembly; Stackable ones coming soon)

Print your box for tidying up your print place. 
The magnetic lid prevents accidental opening.
A stackable version will come soon.

V2 comes with proper champhers and an assembly version (only 3 parts; all to print)

Print In Place Version
It's kind of a tricky print but with proper placements, supports and modifiers it'll work!
Amongst my images you can find my way to place the box and how to support it (normal, no trees)

Assembly Version
-Print a lid, box and the pin from the “V2 Assembly” folder (choose fitting box and lid)
-Attach magnets
-Attach lid to box and close
-Put very little glue to the end of the pin
-Push pin throuh closed hinge till it sits tight

Print Settings
0.4mm nozzle
0.2mm layer height
Supports on (normal; only as mentioned in images)
For extra strength use modifiers with 100% infill for hinges (also in images).
For Medium and Large Boxes: enable brim could solve warping issues
 

Magnets
For my print use round magnets like those (3djake.de).
Diameter 5mm, Height 3mm

Have fun and like if you enjoy! :)