Inventables Makita CNC Dust Boot

This is a dust boot I created for my Inventables Makita CNC X-Carve. This model contains a main boot to stay mounted onto the router clamp, a dust guard to fully cover the milling area and provide better suction, and 2x screws to mount the two together. I printed the main boot with 20% infill on PLA, the Guard with 60% infill with PLA, and printed 2x screws with 80% infill with PETG. Hole size was designed to fit a standard vacuum hose. Lastly, I grabbed a spare broom and removed the bristles so I could hot glue them onto the boot. Cut to preferred height. Feel free to reach out if you have any thoughts or recommendations!