Battery holder 65mm Happymodel frame

Battery holder designed to mount 300mAh Tattu batteries - “batt holder 300mah wings” recommended and main model for this publication. From original frame I cut off battery holders bars and side walls, see photos. Cut out red marked elements from the printed holder as indicated on the picture. Mount holder as depicted in the steps. For proper holder installation please take a look on all the photos in the uploaded order.

OPTIONAL: I have uploaded also some optional simple version without “wings” but no such easy and fast to install battery as the main model with “wings”. You can also to cut off “wings” and give it a try what better fits you. Any suggestion for specific solution, improvement well seen.

Print parameters:

TPU Sunlu 95A white

Layer: 0,2 mm

Nozzle temp: 205 C

First layer temp: 225 C

Speed: 35 mm/s