Wall mount for Lego Maersk Tripple E Class 10241

Simple wall mount for the Lego Maersk Tripple E Class set no 10241. You'll need to print at least two
1
5
0
85
updated December 28, 2024

Description

PDF

I used the following settings:

  • printed on the side, to have forces pulling the layers apart
  • 0.2mm layer 
  • 3 walls
  • 30% cubic infill
  • manual support for the mounting holes

I added a simple drill template.
Two screws per bracket is properly a little over the top, but better save than sorry 

Tags



Model origin

The author marked this model as their own original creation.

License