AMS Drying Chock Remix w/ PolyDryer Adapter

Seamlessly connect your Polymaker Dryer to the Bambulab AMS system, ensuring continuous, active drying of your filaments
7
33
1
412
updated December 28, 2024

Description

PDF

AMS Drying Chock Remix v2.0.1 – Optimized Design for Direct PolyDryer Integration

Introducing version 2.0.1 of the AMS Drying Chock Remix, now featuring a complete redesign of the left and right wedges to directly support the PolyDryer — no ducts needed! This streamlined upgrade maximizes airflow efficiency and minimizes energy loss, as the dryer now sits directly on the wedges, delivering heated air seamlessly into your AMS enclosure.

After 8 hours of continuous running, the temperature at the AMS's rooftop reaches 126.6 °F  (52.6 °C), and the humidity level is stable at 10%.
 

What’s New in Version 2.0.1:

  • Increased Clearance: More space has been added between the wedges’ intake and the AMS lid to ensure smoother installation and better compatibility with the AMS system.
  • Rounded Corners for Improved Circulation: The sharp 90-degree corners at the front and sides of the wedges have been replaced with a 25mm radius curve, allowing air to flow more freely around the enclosure.
  • Redesigned Inner Vents: New fin-shaped openings have been added to the inner vents to redirect airflow downwards and toward the middle of the AMS, ensuring even air distribution across all filaments.

What’s New in Version 2.0.0:

  • Direct Dryer Integration: The redesigned wedges are custom-fit to accommodate the entire width of the Polymaker Filament Dryer. This eliminates the need for long ducts, preventing airflow and temperature dispersion.
  • Maximized Airflow & Efficiency: With no ducts, airflow is direct and uninterrupted, significantly improving the drying performance and ensuring your filament stays in optimal condition.
  • Simplified Setup: The updated design reduces the number of parts to print from four to just two, saving you time and filament. Assembly is faster and easier, getting you back to printing sooner.

Version 2.0 of the AMS Drying Chock Remix is the ultimate upgrade for those looking to enhance their filament drying setup with increased efficiency, a cleaner design, and fewer printed parts. Experience the difference in your 3D printing workflow today!

 

PRINT INSTRUCTIONS

See the .3mf file for all the printer settings I used. For optimal results, use PETG or ABS/ASA filament.

  • 0.2mm layer
  • 3 walls
  • 15% infill
  • tree support
  • brim

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Redesigned the two chock wedges to accomodate the Polydryer without the need for a duct or other element

License