This model serves as a replacement of original selfie stick ¼ standard base camera mount.
Project consist of two parts:
Printing Settings (base)
Print position: default orientation
Material: PET/PLA
Supports: Yes
Layer height: 0.2 mm
Perimiters: 3
Infill: 25%
Fill pattern: Grid
Nozzle: 0.4 mm
Printing Settings (base washer)
Print position: default orientation
Material: TPU
Supports: No
Layer height: 0.2 mm
Infill: 100%
Nozzle: 0.4 mm
The author marked this model as their own original creation.