NOTE: This model has NOT been tested due to no need for us to use it. Make this at your own risk. Adjustments can be made by request, but we don't intend to work on this otherwise. It's offered as-is.
Suggested settings: ("engineering" profiles if your slicer has that) - slow = accurate
Nozzle: 0.4mm or 0.6mm
Layer height: 0.1mm - 0.15mm
Material: Any (the stronger, the better)
Infill: Cubic (20-40%)
Walls: 3+
Print speed: 30mm/s
The author marked this model as their own original creation.