Troodon 2.0 Pro Custom Skirts

Print with:
0 tops layers
0 bottoms layers
Whatever infill and percentage you want-that is what creates the design.

Use 2 M3 heat set inserts for the screen magnets

Place face down with supports only for the screw holes

The large middle sections have to be printed diagonally 

In my pictures I used Honeycomb infill at 22% for the middles and Adaptive Cubic at 20% for the side pieces. 

These will also get rid of the front USB ports and wifi antenna hole for a cleaner look. I relocated the USB to the rear.