1/24 Model Car Display Stand

If anyone is like me and has a bunch of 1/24 model cars and no way to display properly, then this print is for you!

This print is fully designed with Fusion 360.

Although I added the .STL for the fully assembled model as well, I do not recommend printing it this way because of the amount of support it requires. I split the top and bottom as two pieces to be able to fully print with no supports. I have uploaded it incase someone wants to, but I don't recommend.

I like to create two plates when printing and fill one with the base and fill the other with the tops.

15% Infill with 0.2mm layers is completely okay.

I do recommend adding a drop of CA glue in each hole on the top plate when assembling. It isn't fully necessary as the stand will sit okay together, but a better piece of mind when having the cars sitting on top. Allows for an easier time picking up the stand too.

Please comment your makes with pictures if possible! I'd love to see other peoples model cars too! Also, let me know if there are any other model stands you are looking for and I might be able to design something for you!

Don't own a 3D Printer and are just checking out some cool designs? No problem!

This design can be purchased on my Etsy

Looking for a 1/18 scale model? I have one for those cars too!

Looking for a 1/32 scale model? I have one for those cars too!

Enjoy!