Tesla AirPods Pro Adapter

This is a rebuild of the AirPods wireless adapter for Tesla wireless chargers by slyice https://www.thingiverse.com/thing:3611401 with support for AirPods Pro. I ended up completely building this from scratch, but with the inspiration, for a similar idea as the original, I had seen by slyice. So leaving it marked as a remix with nods to the original creator, but know this was a fresh design in Fusion360 by myself. Goal was light on filament, stylish, including a T logo, and being easy to use.

So I saw this print and wanted it, but thankfully noticed before printing that it wasn't sized for AirPods Pro, per the comments. I spent many hours learning how to use Fusion360 and rebuilt it from scratch. Some annoyances with constraints later, and I've got a decent working product. The first print was on the money. I noticed the charging pad was a little funky in how it interacted as at first it gave me the blinking light indicating an issue. The guidance I can provide is to push the frame as close to the middle divider as possible as the placement of the case heigh-wise should be spot on.

Keep in mind your charging pad could differ and this may not work in such circumstances. I'm hoping this should be fairly universal as most of the charging pads out there have roughly the same layout, same location of charging coils, and the same dimensions relative to the base and the divider. I apologize if it does not work for you.

If you like this print and benefit from it - please consider buying me a coffee or two: https://www.buymeacoffee.com/1activegeek

Print Settings
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20
Filament brand: Overture
Filament color: Black
Filament material: PETG

Original Cross Posting from Thingiverse back in 05/2020: https://www.thingiverse.com/thing:4378826

This remix adjusts the original so that you can use AirPods Pro, and so you can have them sit horizontally instead of vertically where the pods can fall out easier.