Use the drop-in T-nuts to mount different accessories to the Festool workbench MFT. The accessory will be firmly attached to the workbench.
I made two different versions of the T-nuts, one threaded for M3 to M6 and the other for a nut or hex screw for M3 to M5.
In the model files, the parts are orientated in the direction best suited for printing. Use e.g. PLA and a nozzle width of 0.4 mm or less and an infill of 100 % to make it solid. For the threaded T-nuts you will need to print with a layer height of 0.12mm in order for the threads to be usable. My recommendation is a brim, as the footprint is small. No support structure are required for the printing. There is no need for post-print finishing and the screws are easy to screw in.
The author marked this model as their own original creation.