Apollo Air-1 custom wall mount

This is my early-stage version of a wall mount that should fit an Apollo Automation Air-1 device shipped in late-2024+. It can be mounted with 1 – 3 screws. 

Print recommendation

• 0.4mm nozzle
• 0.2mm layer height
• 10% – 25% infill
• 3-4 walls
• no brim or mouse ear style brim if corners peel up

Mounting options

• Single screw: If you want to keep the installation minimal and preserve the ability to rotate the device
• 2-3 screws: If your screws are small or you're screwing into drywall and need more strength.

Edit the model

• The source is available at https://cad.onshape.com/documents/178cfe6c648e31d0c49f3fd5/w/714800836e3cc3055281d28e/e/00f9a289768751e95fc7af6d