Ghost in the shell hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 141.49x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Black
PLA gray
PLA red
PLA White
Swap Instructions:
Start with Black
At layer #7 (0.64mm) Gray
At layer #12 (1.04mm) swap to red
At layer #19 (1.6mm) swap to White
njoy
Below is the link with all my designs
The author marked this model as their own original creation.