Raspberry Pi Camera Module 3 Telescope Mount

Allows a Raspberry Pi Camera Module 3 to be used in a telescope for astrophotography. The eyepiece will fit any 1.25" focuser.

There are two files, one for the eyepiece that goes into the focuser and another for a cap that sits over the top, you will also need the following:

• 4off M3x12 Cap Head Bolts
• 4off M2x4 Cap Head Bolts

You may want to use a longer data cable that is available on the internet depending on how far away from your Pi you have the camera (mine is attached to the body of the telescope).

Increase square aperture for CM3, close eyepiece slots.