Prepared the 3mf file of the Body for multi-color printers!
I made two types of toys:
The project contains many individual small parts, bed adhesion is super important! I recommend using glue or brim Mouse ears.
Print Settings:
Filament | PLA, PETG others not tested |
Layer Height | 0.2 mm or less |
Wall loops | at least 3 |
Infill | 15%, grid |
Top\Bottom shell | 4 |
Supports | None |
Brim | As needed (depends on bed adhesion), recomended - Mouse ear |
For the part Face:
Layer Height | 0.16 mm or less |
Wall loops | 4 |
Infill | 20%, rectilinear |
Simple assembly animated guide:
The author marked this model as their own original creation.