Dillon Case Feeder to Spring Tube to Lee Tube Adapter

Wanted to connect my Dillon case feeder to my Lee 6 Pack Pro and APP. For some reason, the only adapters I could find were $45 on Ebay, which is absurd.

There are 4 major components:

1. Dillon case feeder to spring tube adapter.
2. A spring tube. Can get one off AliExpress or something.
3. Spring tube to Lee tube adapter.
4. Lee tube that probably came with your Lee press.

There are two spring tube sizes supported. 16mm is the one to get-- it will work for anything up to like .45 ACP or 6.5 Creedmoor or whatever.

14mm is also supported since it's what I had on hand initially, but it will not fit .45 ACP, etc.

Also included is an optional flange to mount the case feeder to the bench with a 1" wooden dowel from Home Depot or something.

Recommended print settings for the adapters:

• 0.12mm layer height
• 2 walls
• 15% infill

Recommended print settings for the flange:

• 0.2mm layer height
• 4 walls
• 25% infill

Video: