Read carefully before downloading the model!!!
Square flower clock face 2 mm thick, 20 cm x 20 cm (two colours)
The first variant of model has got 5 mm hole. The second variant had got 10 mm hole.
This clock face can be used for a real clock. Just add a clock movement and hands, which you can buy online or at a watch store. Another option is to use it as a school clock for children.
The variant with a smaller hole (5 mm) is more suitable for children's educational clocks, and the variant with a larger hole (10 mm) is suitable for a clockwork.
Some types of movements need a spacer ring and some do not. That's why I added a spacer ring model, which you can stick to the center of the model so that it does not rotate. I also added the last version of the clock face, with an integrated spacer ring. I have both types of clock movements at home, so I will use spacer rings for some of the clock and not for others. Look at your movement very carefully, or measure its shaft, before you decide which model to print!!!
Don't forget to secure the position of the clock movement to the dial using hot glue or another reliable means so that it doesn't rotate during handling.
If you don't want to distort your print, wait for it to cool down.
There must be enough contrast between the background and the numbers to make the numbers easy to read. Therefore, use contrasting colors. No multicolor attachment type MMU3 is required for changing colors.
If you come across a clock movement with a different movement shaft size, you can simply enlarge or reduce the clock as needed or simply adjust the size of the hole in the slicer.
• Hodinový strojek tichý KOV 5/12 mm 6168S Skladem v ČR | Eshophodinek.cz
Hodinový strojek s tichým chodem včetně ručiček HRP60 | Hodinářství.cz
The author marked this model as their own original creation.