Endstop Ender 2 Pro

Hardware:
-2x M3x8mm (or 2x M3x8mm)
-Original M5 mounting screw
-Original endstop pcb

The metal tab of the endstop broke , and in homing noting was gona press the red button without the metal thing.
And i didn't want to buy an new endstop +pcb, or to resolder a new clicky button, i wanted to reuse the existing pcb.

I printed the part in PLA few prototipes , and they were perfect in that material too , but i printed the final part in ABS on a Voron printer at 0.2 layer height, 5 walls 5 top, 5 bottom and 40% infil.

I left some space for the right screw to be mounted from the front and back (i had 1 screw with the head bigger and it was hiting the Pcb Conector ),and i mounted just 1 screw from the back , just to act as a guide pin , and 1 screw to hold the pcb.
The mount had very little play 
But the pcb on the mount had no play