Anycubic Kobra 3 Enclosure

Nothing suits me, so I made parts for enclosure. It is designed for 2mm plexiglass vertical sides and plastic boards as top and bottom cover. For ACE Pro, you have to drill holes, depends on your disposition and silicon them.

There are spaces around corners and plexiglass - they are for sealing with transparent profiles, used on shower doors for example.

Holes are designed for screws DIN 7505A. For hinges, you can use bolts M3 x 20 (15) mm with hidden head.

Check for update, I am up to make improvement to add some features tu place ACE Pro on top of the box and place for automatic ventilation and temperature system.

I am ready to print, so I will upload pictures after I test it, but I am open to your feedback too.

EDIT 2025/01/12: I made some upgrades, for add 20x20 mm vertical sticks to use top board as table for ACE. Also I choose to use 2mm plexiglass for door and 1 side and 4 mm wood board for 2 sides (don't need full transparent box).