Mini Server Rack

Mini server rack - parts can be printed on a 220x220 build.

I used Uhu glue to bond the main body (bottom and top together).

4.2mm x 45mm wood screws were used to attached the bottom part of a 17mm board.

M4 screws were used for mounting, can also use threaded inserts.

Thanks to https://www.printables.com/@StigTurner_1679968 for his main model as I've remixed this from https://www.printables.com/model/731710-mini-server-rack 

This is a remix of https://www.printables.com/model/731710-mini-server-rack.
Changes:

• Removed the front panel/door.
• Removed the bottom part and adjusted to fit a 17mm thick board for heavier and solid bottom.
• Adjusted the main body, extending the height for more clearance and divided the body in to two parts.
• Remixed the shelf to fit a mini-pc front panel.

Patch panel was a remix of https://www.thingiverse.com/thing:5146793. Adjusted the corners as well as the sides to fit the rack.