ZWO ASIAIR Plus Accessory Plate

This accessory plate uses the M4 holes on the side of ZWO ASIAIR Plus. It provides three ways of organizing cables and mounting accessories:

• using M4 holes in 20mm raster. These holes have chamfers for the flat head of M4 DIN 7991 screws and so make the screw head disappear in the plate.  
• eyelets used with cable ties. Two are provided as a sample
• eyelets used with 10mm hook-and-pile fastener (also known as “velcro” (R) fastener), 20cm piece is provided

Two M4 DIN 7991 8mm total height flat head screws are required to mount the plate on ASIAIR. 10x2mm hook-and-pile fastener stripe should be used. It is widely available on Internet.

The plate can also be used with Photastro mounting kits in combination with the ASIAIR mounting on the kit. Additional long screws can be provided for this. Please select this option when ordering if needed.