Bambu AMS Drawer Addition

This drawer set was designed to match the original AMS drawer stand by chenwei and be stackable with it. 

Each part should be printed in the orientation that the stl loads. 

I have only included the parts that I modified here. The drawers, drawer faces and knobs should be taken from the original model. 

I had printed the AMS drawer stand by chenwei over a year ago and wanted a second set of drawers for more storage. 

I took the original design and removed the side tabs that slot into the bottom of the AMS and also shortened the panels to just above the height of the drawers. There was no need to the front panel pieces that sit above the drawers on the original design. 

I then copied the small holes for feet in the side and middle panels to the top of the panels so that alignment pins can be added to stack the original drawer unit on top.