UniFi Patch Cable Spacer

A cable spacer to hold the 3mm UniFi Patch Cables 14mm apart (spacing of the ports on Ubiquiti switches)

10m

1× print file

0.25 mm

0.40 mm

2.00 g

305

updated December 21, 2024

Description

Holds the thin 3mm Unifi Patch Cables 14mm apart (spacing of the switchports), secured with a zip-tie.

I suggest printing with PETG, though there is no reason other filaments like PLA won't work. I used 20% infill to increase the rigidity a bit.

The author marked this model as their own original creation.