Triforce Christmas Tree Ornament - The Legend of Zelda

The Triforce is featured throughout the Legend of Zelda's franchise, and what better way to show your love of the series by hanging the symbol of Power, Wisdom, and Courage in your own home. 

Originally made for my father as a gift for his Christmas Tree, but you can put it anywhere around the house all year round if you so wish!

Printing instructions:

• 0.4mm nozzle
• 0.15mm Speed layer height (but any layer height is possible)  
• Colour change at layer 21 (If using a 0.15mm layer height)
  • I chose a contrast of Black and gold but it could be printed just gold (or any colours you feel like).
• Prusa Mk4 took around 16 minutes to print

The current size is designed to accept string or plastic wire up to Ø1.5mm diameter or ribbon up to 2mm wide. 

Step one: Print it

Step two: Find a hanging device (string or plastic wire or ribbon or whatever you want)

Step three: Insert the hanging device into one of the holes until it comes out the other side.

Step four: Tie the two ends of the hanging device together (aka the most difficult step).

Step five: Hang it in your home, or someone else's home, of gift it to someone.

Step six (optional): Take lots of photos and upload the makes to printables.

This is published under a NON COMMERCIAL license, so please do not sell the design or prints made with this design (I don’t want Nintendo to hunt me down).