Tale slippers

Sizes: EU

Search “insert liner fur clogs” (link 1, link 2)

Use TPU 95A first, don't use "high speed", "high flow" (too rigid)

Download  “Tale_print files.zip” folder and use the universal print files (gcodes) or the Bambu Studio / Orca slicer profile you find inside instead of slicing the 3d models. 
 

---

Bambu Studio / Orca Slicer settings

Shoe:

layer height: 0.2
line width sparse infill: 0.6mm
wall loops: 0
top shell layers: 0
bottom shell layers: 0
sparse infill density: 62%
Infill pattern: Grid
Infill anchor: 1000 (unlimited)
Max infill anchor: 1000 (unlimited)
Infill direction: 45°
Detect narrow internal solid infill: no
Speed sparse infill: 18 mm/s
Enable support: no
Reduce infill retraction: no

Filament:

Retraction: 1.8mm
Wipe: no
Z hop: 1.2mm, Normal type
Max volumetric speed: 4.8 mm^3/s 
 

---

Cura slicer settings:

- place the model diagonally (45°)
- layer height: 0.3mm
- infill line width: 0.6mm
- wall line count: 0
- top layers: 0
- bottom layers: 0
- initial bottom layers: 0
- infill line distance: 2mm
- infill pattern: grid
- connect infill lines: yes
- infill line direction: []
- infill overlap: 0mm
- infill speed: 18mm/s

Website: riverfamily.art

LICENSE: Public Domain (https://creativecommons.org/share-your-work/public-domain/cc0/)

Also applies to gcodes, slicing process, pictures, videos and names