QiDi Q1 Pro camera cover

Stock camera configuration in QiDi Q1 Pro 3D printer causes unnecessary image quality degradation because of LED light falling directly to camera lens (at least if you have the same Q1 Pro version as me, because I can see that QiDi listens to their customers and works on product improvement).

I have designed this cover to eliminate above problem.

Just print (if using PLA be aware that heated chamber might be to hot in some cases) and put it on the camera. It is done :-)

Print with no infill, just increase walls number to 4.

Please print up side down, no supports, no brim.

Happy printing :-)