Tripod for Mini Ball Head

A mini tripod meant to accomodate a tripod head with a 3/8 inch bolt.

There are two versions of legs - a fully 3D printed one (Full-Tripod_Legs_x3.stl) and one meant to accommodate 10mm round aluminum tubes for strength (Tripod_Legs_x3.stl & Tripod_Feet_x3.stl)

The legs are attached to the base (Tripod_Base.stl) using three 5mm screws.  I used lock nuts to make sure they don't unscrew over time, but regular nuts would work also (with some locktite or a dab of CA glue for security).

This mini tripod can support my dSLR with lens and flash weighing a total of 1.8kg (4 pounds).