Creality Filament Sensor Lid with PC4-M6 Coupler

Add a PC4-M6 Coupler to feed filament to the sensor from a dry box

updated December 21, 2024

Description

Meant for the Creality filament sensor as used on the Sovol SV01 Pro and Creality Ender 3 S1.

Opted not to put a coupler on the lower portion.

Requires two lengths of 4 mm PTFE tubing and a PC4-M6 tubing coupler.

Insert and trim in place.

The author marked this model as their own original creation.