IKEA-LACK adjustable foot

height adjustable foot for IKEA-LACK table. Increases the table legs about 52mm, up to approx. 70mm. Adjustment is done by threaded bolts, driven with a 36 wrench. Useful for levelling, too.

Print instructions

You will need 4 sets (Top-Part + Bolt) for one LACK table. Can be done in one print job. Takes approx. 22h, depending on your settings.
I printed this in ABS, 0,2mm layer, 10% honeycomb infill on a MK3s. Might work in PET-G as well. Supports will be needed for the Bolts.