Gaggiuino Rear Mount for Nextion 3.5" Display
I wanted a bigger screen but also wanted an open-source solution. Rotation on the nextion 3.5" gives options.
0
2
0
19
updated January 1, 2025
Description
PDFAdded the front and back panel pieces to contain a Nextion 3.5" screen. This is for the NX4832K035 specifically.
The case is held together with 4x 16mm M3 countersunk screws, tapping into the plastic assuming the tolerances on your printer are good.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Supports the Nextion 3.5" screen.
