plane iron sharpening guide setup tool

Tool to setup the sharpening angle of the sharpening guide. Made to print upright, to avoid support.

You can fit it to your personal guide and iron by changing the following 3 user parameters:

• IronThickness = 3mm
  • Thickness of the plane iron
• GuideHeight = 30.5mm
  • Height of the sharpening guide, Roller to Plane Iron reference face
• GuideWidth = 40mm
  • width of the guide, from the face bumping against the setup tool the parallel face 

Upright printable, to avoid support

add 45° angle