(Un)Original Drybox Temperature/Hygrometer Mount

I don't use the standard silica gel container locations because I find them very difficult to reach. I also chose not to print the parts that mount the hygrometer in the top of the box because I wanted those parts to have as much strength as possible. I found that I still wanted to be able to check the temperature and humidity in the drybox however, so I came up with this model that holds these standard round hygrometers from Amazon and sits in the original silica gel container locations. 

There are two versions included: 

• a solid, 1-piece version 
• a 2 piece version that is much easier to print, but requires assembly. 
  • you will need 3 x M3x10 socket head cap screws to assemble the pieces.