Prusa MK4/MK4S Snap-On Light Mount for IKEA SKYDRAG/SILVERGLANS

Remix of the already great design by pipo. Also check out the original design!

Let there be light! 

Use this model to easily mount an IKEA SKYDRAG oder SILVERGLANS (40cm) light bar to the Z-axis of your MK4/MK4S. The light bar is also powered with 24VDC like the MK4/MK4S, which allows connecting it to the power supply of the printer.

This model is designed to be snap-on, so there is no need of exchanging the Z-axis mount. There are two versions for each side available: one with and one without a cable duct. Use the version which fits your use case the best. I personally use the cable duct for the right side. 

Also consider of using this nice cable box to connect everything and add a light switch (see last picture, all credits to pipo): https://www.printables.com/model/847589-light-control-junction-box-for-prusa-mk4-for-mount

Print instructions: 

Material: PETG (recommended), PLA

Infill: 20%

Walls: 2

Supports: only necessary for the knob which connects to the light bar

Happy printing! If you like this model, leave a like and upload your make!

Adapted and enhanced the design to be snap-on to avoid changing the Z-axis mounts