Samsung galaxy s6 lite case wall mount

Wall mounted case for the Samsung galaxy s6 lite. The mount allows for variable viewing angles and easy removal.

Required hardware:
- 3 x M3 x 6 mm flat head screws (flat head - 6 x 1mm)
- 3 x M3 nut
- 13 x 3 x 2mm magnets (Width x Height)
- 4x 4mm wall mounting screws 

Note: 
- In addition to the screws to hold the case to the case mount, I used some glue to ensure a stronger bond.
- When setting the magnets into the wall mount and case mount, make sure they are the correct orientation (attracted to each other) and drop some glue behind them and not in front so you don't interfere with the magnets interfacing with the others.
- Once the magnets are set, make sure the polygon alignment between the case and the case mount is correct (Snaps to 0 and 90 degrees or portrait and landscape), misalignment will cause these not to be able to be snapped to these angles.

Thickened the back of the case to 3mm to allow for an inset polygon and M3 flat head screws.