Wingspan dicetower (multi-material)

This dice tower is a replacement for the one that comes in the Wingspan box. It is an iteration on an existing design. Now you can print in in multiple colors.

All parts are split in two or three parts. Were “1”is the solid part, “2” is the grain and “3” is an extra part. You could use a third color for it if you like. ;)

My prints are done with the following filaments:

• Bambu Lab PLA Matte Latte Brown, Spool (part “1”)
• 123-3D Filament brown 1,75 mm PLA (Jupiter serie) (parts “2” and “3”)

I wanted to print this model in two colors, but the original parts were not really suited for it. So I separated the wood grain in each model and thickened it, so it's slightly inserted inside the solid part instead of on top of it. The grain did stick out 0.4mm, but I changed it to 0.2mm, so the box and the roof print better, as they are printed upright.

There were also a lot of really small wood grain parts that I removed for a cleaner print.

Lastly, all mesh issues that I could find are cleaned up.