#0192 Foot Rest (for standing desks)

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!  

**********

I use a standing desk when I work and for long-term usage, I switch between standing and leaning against a leaning stool on a regular basis.  This helps me avoid “sitting” in an office chair.  

However when I lean against a stool, I put pressure on my ankles that is not great for them over time - so I designed this foot rest to push my feet against (at a comfortable angle) to avoid injuring my ankles - works great on carpet!

If you are not familiar with leaning stools, check out this one.

Key features:

1. Angled at 35° from the floor for comfort.
2. Barbed on the bottom to grab onto carpet so it prevents you from sliding forward (not designed for hard/smooth floors).
3. Allows you to rotate the foot rest to help stretch your ankles (see pic above).
4. Mostly hollow to minimize material usage.

Printing Recommendations:

1. For fastest print use a 0.6mm nozzle if you have it.  0.4mm nozzle works too.
2. 2 vertical walls is plenty strong enough, typically.  More if you are a bigger/taller person.
3. Great model for PLA.
4. Print one for each foot.
5. Due to its larger size, adhesion helpers will help it stick to the bed - you can use the .3mf file attached that includes adhesion helpers.
6. A 2-3mm brim can also be helpful.  You can easily remove the brim and adhesion helpers with a deburring tool.

**********

If you add this to your collection and/or download the model, please >click< the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!

P.S. Please post some constructive feedback if you'd like to see something improved.