We have many "Ello Duraglass Glass Food Storage Meal Prep Containers - Glass Food Storage Meal Prep Bowls with Silicone Sleeve and Airtight Lids, 10 Piece 5 Pack, Fruit Salad, 3.4 Cups". The lids are about 0.5" thick plus locking tabs, slippery, don't stay stacked and kept falling, so I designed this rack.
Each rack holds 6 lids.
Holds lids on end with the bottom tab slightly folded and the top (when in the rack) folded flat to clear the drawer above.
I print this in PETG.
Printer Brand: Bambulabs
Printer: Bambu P1P
Rafts: No
Supports: No
Layer Height: 0.28mm
Nozzle: 0.6mm
Line Width: 0.8mm
Infill: 25%
Filament: Any. I like PETG.
Notes:
Printed with wide lines (0.8mm with 0.4mm (now 0.6mm) nozzle) and layer height 0.28. Surface finish suffers a bit, however that's a low priority for me.
Large bottom surface tends to warp; I added inner / outer brims and adhesion aids (ovals) at the corners during slicing.
I printed at 240C, bed at 80C for adhesion (hot plastic is sticky), with blue tape to guarantee removability.
These have proven quite durable; reduced infill to 25%.
How I Designed This ===================
Design notes
Used calipers and OnShape; link:
https://cad.onshape.com/documents/296df6420a4792fa694d5487/w/ea4396fbeaa1090f320fbce1/e/38eda6046c77f98465029db6
Category: Organization
The author marked this model as their own original creation. Imported from Thingiverse.