5.25" Disk Drive Desk Enclosure

This is a desktop enclosure meant to house a 5.25” standard PC disk drive. The feet can be printed out of TPU or a similar material to isolate the vibrations created by the disk drive in operation. It is not meant to be mounted in a rack. The feet can be inserted into the slots on the enclosure using a glue such as hot glue. The drive is removable from the enclosure, but it is designed to be friction fitted to the enclosure. The drive can be removed by pushing on the drive from the slot at the rear of the enclosure.

Print Settings

Printer Brand:

ELEGOO

Printer:

**Rafts:**

Doesn't Matter

Supports:

**Resolution:**

0.2

Filament Material:

Notes:

These settings are for the rubberized feet. Print with the wall layers between 4 and 6.

Post-Printing

Attaching Feet to Enclosure

Enclosure Print Instructions ============================

4 wall layers should be used to ensure proper strength of the enclosure. Infill doesn’t matter for this part given the thickness of the walls of the enclosure. This part should be printed with the rear surface on the build plate such that the front of the enclosure is facing upwards. You can use a raft for increased contact with the build plate but this shouldn't be necessary.

Category: Computer